Home>Products>Insert Bearings Spherical OD>DODGE INS-SCH-115E Insert Bearings Spherical OD
DODGE INS-SCH-115E MODELS
Need a CAD or 3D Model?
DODGE INS-SCH-115E Insert Bearings Spherical OD
Insert Bearings Spherical OD
DODGE INS-SCH-115E Bearing SPECIFICATIONS
With over 10170 full-service stores, our DODGE INS-SCH-115E Insert Bearings Spherical OD inventory is extensive and our parts are priced Deep Groove Other Features right. within 24 hours. This helps you maximize your productivity by saving time and N/A Minimum Buy Quantity your hard-earned dollars.
- DODGE
INS-SCH-115E
- L521900
- L521949
- Imperial
- Stamped Steel
- 34800 lbf
- 9020 lbf
- 4.25 in
- 0.8438 in
- TIMKEN AXLE CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Dimensions DODGE INS-SCH-115E Insert Bearings Spherical OD
- L521900
- L521949
- Imperial
- Stamped Steel
- 34800 lbf
- 9020 lbf
- 4.25 in
- 0.8438 in
- 0.06 in
- 4.49 in
- 4.57 in
- 0.1 in
- 0.01 in
- 0.19 in
- 5180 lbf
- 20000 lbf
- 39400 lbf
- 3480 lbf
- 1.49
- 152
- 108
- 0.135
DODGE INS-SCH-115E Specifications for DODGE INS-SCH-115E Insert Bearings Spherical OD
DODGE INS-SCH-115E Insert Bearings Spherical OD Interchange Guide | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | A | d | D | B | C | U | H | |
115FSF180 | NSK | - | - | 115 mm | 180 mm | 98 mm | 815 kN | 165 mm | - |
ARN55115 | NTN | - | - | 55 mm | 115 mm | - | 25 mm | - | - |
YSPAG 210-115 | SKF | - | - | 49.212 mm | 90 mm | - | 22 mm | - | - |
ZY-2115 | NSK | - | - | 21,3 | 29 mm | - | 17,9 kN | - | - |
115PCR2401 | NSK | - | 183 mm | 115 mm | - | - | - | - | - |
115RNPH2001 | NSK | - | - | 115 mm | 205 mm | - | 625 kN | - | - |
5115 | Ruville | - | - | - | - | - | - | - | - |
YSP 210-115 SB-2F | SKF | - | - | 49.212 mm | 90 mm | - | 22 mm | - | - |
ZGB 100X115X100 | INA | - | - | 100 mm | 115 mm | 100 mm | 3000 kN | - | - |
ZARN55115-L-TV | INA | ZMA55/98 / Designation of recommended INA locknut | - | 55 mm | 115 mm | 17,5 mm | 25 mm | - | - |
ZARN55115-TV | INA | AM55 / Designation of recommended INA locknut | - | 55 mm | 115 mm | 17,5 mm | 25 mm | - | 82 mm |
LINK BELT SG2E20ELPAK33 Insert Bearings Spherical OD | Series:L521900; Cone Part Number:L521949; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:34800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9020 lbf; d:4.25 in; B - Cone Width:0.8438 in; R - Cone Backface To Clear Radius3:0.06 in; da - Cone Frontface Backing Diameter:4.49 in; db - Cone Backface Backing Diameter:4.57 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Aa - Cage-Cone Backface Clearance:0.01 in; a - Effective Center Location4:0.19 in; C90 - Dynamic Radial Rating (90 million revolutions)5:5180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:20000 lbf; C0 - Static Radial Rating:39400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3480 lbf; K - Factor8:1.49; G1 - Heat Generation Factor (Roller-Raceway):152; G2 - Heat Generation Factor (Rib-Roller End):108; Cg - Geometry Factor:0.135; |
LINK BELT SG216MHFFLPA Insert Bearings Spherical OD | Series:L521900; Cone Part Number:L521949; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:34800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9020 lbf; d:4.25 in; B - Cone Width:0.8438 in; R - Cone Backface To Clear Radius3:0.06 in; da - Cone Frontface Backing Diameter:4.49 in; db - Cone Backface Backing Diameter:4.57 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Aa - Cage-Cone Backface Clearance:0.01 in; a - Effective Center Location4:0.19 in; C90 - Dynamic Radial Rating (90 million revolutions)5:5180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:20000 lbf; C0 - Static Radial Rating:39400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3480 lbf; K - Factor8:1.49; G1 - Heat Generation Factor (Roller-Raceway):152; G2 - Heat Generation Factor (Rib-Roller End):108; Cg - Geometry Factor:0.135; |
LINK BELT SG221ELPA Insert Bearings Spherical OD | Series:L521900; Cone Part Number:L521949; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:34800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9020 lbf; d:4.25 in; B - Cone Width:0.8438 in; R - Cone Backface To Clear Radius3:0.06 in; da - Cone Frontface Backing Diameter:4.49 in; db - Cone Backface Backing Diameter:4.57 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Aa - Cage-Cone Backface Clearance:0.01 in; a - Effective Center Location4:0.19 in; C90 - Dynamic Radial Rating (90 million revolutions)5:5180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:20000 lbf; C0 - Static Radial Rating:39400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3480 lbf; K - Factor8:1.49; G1 - Heat Generation Factor (Roller-Raceway):152; G2 - Heat Generation Factor (Rib-Roller End):108; Cg - Geometry Factor:0.135; |
LINK BELT SG243ELPA Insert Bearings Spherical OD | Series:L521900; Cone Part Number:L521949; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:34800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9020 lbf; d:4.25 in; B - Cone Width:0.8438 in; R - Cone Backface To Clear Radius3:0.06 in; da - Cone Frontface Backing Diameter:4.49 in; db - Cone Backface Backing Diameter:4.57 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Aa - Cage-Cone Backface Clearance:0.01 in; a - Effective Center Location4:0.19 in; C90 - Dynamic Radial Rating (90 million revolutions)5:5180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:20000 lbf; C0 - Static Radial Rating:39400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3480 lbf; K - Factor8:1.49; G1 - Heat Generation Factor (Roller-Raceway):152; G2 - Heat Generation Factor (Rib-Roller End):108; Cg - Geometry Factor:0.135; |
LINK BELT SG227E1LPA Insert Bearings Spherical OD | Series:L521900; Cone Part Number:L521949; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:34800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9020 lbf; d:4.25 in; B - Cone Width:0.8438 in; R - Cone Backface To Clear Radius3:0.06 in; da - Cone Frontface Backing Diameter:4.49 in; db - Cone Backface Backing Diameter:4.57 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Aa - Cage-Cone Backface Clearance:0.01 in; a - Effective Center Location4:0.19 in; C90 - Dynamic Radial Rating (90 million revolutions)5:5180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:20000 lbf; C0 - Static Radial Rating:39400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3480 lbf; K - Factor8:1.49; G1 - Heat Generation Factor (Roller-Raceway):152; G2 - Heat Generation Factor (Rib-Roller End):108; Cg - Geometry Factor:0.135; |
LINK BELT SG2E32ELPAK8299A Insert Bearings Spherical OD | Series:L521900; Cone Part Number:L521949; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:34800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9020 lbf; d:4.25 in; B - Cone Width:0.8438 in; R - Cone Backface To Clear Radius3:0.06 in; da - Cone Frontface Backing Diameter:4.49 in; db - Cone Backface Backing Diameter:4.57 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Aa - Cage-Cone Backface Clearance:0.01 in; a - Effective Center Location4:0.19 in; C90 - Dynamic Radial Rating (90 million revolutions)5:5180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:20000 lbf; C0 - Static Radial Rating:39400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3480 lbf; K - Factor8:1.49; G1 - Heat Generation Factor (Roller-Raceway):152; G2 - Heat Generation Factor (Rib-Roller End):108; Cg - Geometry Factor:0.135; |
LINK BELT SG247E1LPA Insert Bearings Spherical OD | Series:L521900; Cone Part Number:L521949; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:34800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9020 lbf; d:4.25 in; B - Cone Width:0.8438 in; R - Cone Backface To Clear Radius3:0.06 in; da - Cone Frontface Backing Diameter:4.49 in; db - Cone Backface Backing Diameter:4.57 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Aa - Cage-Cone Backface Clearance:0.01 in; a - Effective Center Location4:0.19 in; C90 - Dynamic Radial Rating (90 million revolutions)5:5180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:20000 lbf; C0 - Static Radial Rating:39400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3480 lbf; K - Factor8:1.49; G1 - Heat Generation Factor (Roller-Raceway):152; G2 - Heat Generation Factor (Rib-Roller End):108; Cg - Geometry Factor:0.135; |
LINK BELT SG216ELPAK5 Insert Bearings Spherical OD | Series:L521900; Cone Part Number:L521949; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:34800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9020 lbf; d:4.25 in; B - Cone Width:0.8438 in; R - Cone Backface To Clear Radius3:0.06 in; da - Cone Frontface Backing Diameter:4.49 in; db - Cone Backface Backing Diameter:4.57 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Aa - Cage-Cone Backface Clearance:0.01 in; a - Effective Center Location4:0.19 in; C90 - Dynamic Radial Rating (90 million revolutions)5:5180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:20000 lbf; C0 - Static Radial Rating:39400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3480 lbf; K - Factor8:1.49; G1 - Heat Generation Factor (Roller-Raceway):152; G2 - Heat Generation Factor (Rib-Roller End):108; Cg - Geometry Factor:0.135; |
LINK BELT SG219E1LPA Insert Bearings Spherical OD | Series:L521900; Cone Part Number:L521949; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:34800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9020 lbf; d:4.25 in; B - Cone Width:0.8438 in; R - Cone Backface To Clear Radius3:0.06 in; da - Cone Frontface Backing Diameter:4.49 in; db - Cone Backface Backing Diameter:4.57 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Aa - Cage-Cone Backface Clearance:0.01 in; a - Effective Center Location4:0.19 in; C90 - Dynamic Radial Rating (90 million revolutions)5:5180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:20000 lbf; C0 - Static Radial Rating:39400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3480 lbf; K - Factor8:1.49; G1 - Heat Generation Factor (Roller-Raceway):152; G2 - Heat Generation Factor (Rib-Roller End):108; Cg - Geometry Factor:0.135; |
LINK BELT SG216HFFLPA Insert Bearings Spherical OD | Series:L521900; Cone Part Number:L521949; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:34800 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9020 lbf; d:4.25 in; B - Cone Width:0.8438 in; R - Cone Backface To Clear Radius3:0.06 in; da - Cone Frontface Backing Diameter:4.49 in; db - Cone Backface Backing Diameter:4.57 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Aa - Cage-Cone Backface Clearance:0.01 in; a - Effective Center Location4:0.19 in; C90 - Dynamic Radial Rating (90 million revolutions)5:5180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:20000 lbf; C0 - Static Radial Rating:39400 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3480 lbf; K - Factor8:1.49; G1 - Heat Generation Factor (Roller-Raceway):152; G2 - Heat Generation Factor (Rib-Roller End):108; Cg - Geometry Factor:0.135; |
DODGE INS-SCH-115E Insert Bearings Spherical OD Video
DODGE INS-SCH-115E INTERCHANGE
Insert Bearings Spherical OD Part series INS-SCH-115E is a potential replacement for these common bearing part numbers:
INS-SCH-115E
INS-SCH-115E
INS-SCH-115E
INS-SCH-115E
INS-SCH-115E
INS-SCH-115E
INS-SCH-115E
INS-SCH-115E
Contact Us
- TIMKEN AXLE CORP.
- Address3567 South Layton Road Anderson Indiana 98528, U.S.A.
- Phone(Working Time)+1-775-298-7800
- Fax
DODGE INS-SCH-115E Technical Articles
fag xlife number and size chart pdf |
skf yar size chart mm |
skf corvette racing hubs dimensions tolerances |
Insert Bearings Spherical OD CATEGORIES
- Angular Contact Ball Bearings
- Cam Follower and Track Roller - Stud Type
- Cam Follower and Track Roller - Yoke Type
- Cartridge Unit Bearings
- Cylindrical Roller Bearings
- Flange Block Bearings
- Hanger Unit Bearings
- Insert Bearings Cylindrical OD
- Insert Bearings Spherical OD
- Mounted Units & Inserts
- Needle Non Thrust Roller Bearings
- Pillow Block Bearings
- Tapered Roller Bearing Assemblies
- h313 Bearing
- skf lgmt 3 Bearing
- 6203 skf Bearing
- 3205 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Four-row cylindrical roller bearings
- Full Complement Cylindrical Roller Radial Bearings
- Deep Groove Ball Bearings
- Spherical Roller Bearings
- Thk Linear Guide
- Thk Miniature Linear Guide
- Thk Linear Guide Rails
- High Temperature Linear Guide
- Curved Linear Guide
- Thk Linear Bearings And Rails
- Thk Linear Motion