TIMKEN AXLE CORP.
TIMKEN AXLE CORP.
Angular Contact Ball Bearings   Cam Follower and Track Roller - Stud Type   Cam Follower and Track Roller - Yoke Type  
English
English
  • Home
  • Stock Categories
    • Angular Contact Ball Bearings
    • Cam Follower and Track Roller - Stud Type
    • Cam Follower and Track Roller - Yoke Type
    • Cartridge Unit Bearings
    • Cylindrical Roller Bearings
    • Flange Block Bearings
    • Hanger Unit Bearings
    • Insert Bearings Cylindrical OD
    • Insert Bearings Spherical OD
    • Mounted Units & Inserts
    • Needle Non Thrust Roller Bearings
    • Pillow Block Bearings
    • Tapered Roller Bearing Assemblies
    • h313 Bearing
    • skf lgmt 3 Bearing
    • 6203 skf Bearing
    • 3205 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Four-row cylindrical roller bearings
    • Full Complement Cylindrical Roller Radial Bearings
    • Deep Groove Ball Bearings
    • Spherical Roller Bearings
    • Thk Linear Guide
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
  • Technical Articles
  • Angular Contact Ball Bearings
  • Cam Follower and Track Roller - Stud Type
  • Cam Follower and Track Roller - Yoke Type
✖

Home

Stock Categories

Technical Articles

Angular Contact Ball Bearings

Cam Follower and Track Roller - Stud Type

Cam Follower and Track Roller - Yoke Type

Home>Products>Cam Follower and Track Roller - Stud Type>6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type

  • 6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type
  • 6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type
  • 6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type
  • 6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type

SKF KR 16 MODELS

Need a CAD or 3D Model?

What is KR 16 bearing cross reference？
Contact NowWhatsAppBe Our Agent

6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type

category

Cam Follower and Track Roller - Stud Type

SKF KR 16 Bearing SPECIFICATIONS

  • High Quality 6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type. Competitive Cam Follower and Track Roller - Stud Type Pricing. Accept Small 6 mm x 16 mm x 28 mm Order. Easy and Fast 1900 Reference Speed Rating (r/min): Shipping.

  • SKF

  • KR 16

  • 375
  • 375D
  • 374
  • Imperial
  • 2.8 lb
  • Stamped Steel
  • 0 in
  • 2 in
Download SKF KR 16 Spec Sheet
TIMKEN AXLE CORP.

TIMKEN AXLE CORP.China

  • TIMKEN AXLE CORP.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Types of 6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type

  • 375
  • 375D
  • 374
  • Imperial
  • 2.8 lb
  • Stamped Steel
  • 0 in
  • 2 in
  • 3.6718 in
  • 2.0940 in
  • 0.5938 in
  • 1.9689 in
  • 0.030 in
  • 0.050 in
  • 2.24 in
  • 3.35 in
  • 0.09 in
  • 5120 lbf
  • 34400 lbf
  • 8920 lbf
  • 2970 lbf
  • 1.73
  • 0.34
  • 1.99
  • 2.97
  • 37.6
  • 15.4
  • 0.0816
6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type pdf

SKF KR 16 Products and services 6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type

6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type Interchange Guide

No.BrandhWGCdBDM
GAKR 16 PBINA66 mm - - 21,6 kN16 mm21 mm32 mm -
GAKR 16 PWINA66 mm - - 39 kN16 mm21 mm32 mm -
GIKR 16 PBINA - 22 mm - 21,6 kN16 mm21 mm32 mm -
GIKR 16 PWINA - 22 mm - 39 kN16 mm21 mm32 mm -
KR 16 PPSKASKF - - M 611 mm6 mm28 mm16 mm -
KR 16 XSKF - - M 611 mm6 mm28 mm16 mm4 mm
KR 16 PPASKF - - M 611 mm6 mm28 mm16 mm4 mm
KR 16 PPXASKF - - M 611 mm6 mm28 mm16 mm4 mm
KR 16SKF - - M 611 mm6 mm28 mm16 mm4 mm
KR 16 PPXBEARINGS LIMITED - - - - - - - -
KR 16 PPINA - - - - - - - -

 

IKO CF10-1VBUURM Cam Follower and Track Roller - Stud TypeSeries:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816;
IKO CF10-1V Cam Follower and Track Roller - Stud TypeSeries:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816;
IKO CF10-1RM Cam Follower and Track Roller - Stud TypeSeries:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816;
IKO CF10-1VBUUR Cam Follower and Track Roller - Stud TypeSeries:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816;
IKO CF10-1UUR Cam Follower and Track Roller - Stud TypeSeries:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816;
16 mm x 35 mm x 52 mm SKF NUKR 35 A Cam Follower and Track Roller - Stud TypeSeries:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816;
IKO CF10-1R Cam Follower and Track Roller - Stud TypeSeries:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816;
30 mm x 80 mm x 100 mm SKF KR 80 PPA Cam Follower and Track Roller - Stud TypeSeries:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816;
IKO CF10-1UU Cam Follower and Track Roller - Stud TypeSeries:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816;
12 mm x 30 mm x 40 mm SKF KR 30 PPXA Cam Follower and Track Roller - Stud TypeSeries:375; Cone Part Number:375D; Cup Part Number:374; Design Units:Imperial; Bearing Weight:2.8 lb; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; d:2 in; D:3.6718 in; B - Double Cone Width:2.0940 in; C - Cup Width:0.5938 in; T - Bearing Width across Cups:1.9689 in; R - Cone Frontface To Clear Radius1:0.030 in; r - Cup Backface To Clear Radius2:0.050 in; da - Cone Frontface Backing Diameter:2.24 in; Db - Cup Backface Backing Diameter:3.35 in; Ab - Cage-Cone Frontface Clearance:0.09 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5120 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:34400 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:8920 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2970 lbf; K - Factor7:1.73; e - ISO Factor8:0.34; Y1 - ISO Factor9:1.99; Y2 - ISO Factor10:2.97; G1 - Heat Generation Factor (Roller-Raceway)11:37.6; G2 - Heat Generation Factor (Rib-Roller End):15.4; Cg - Geometry Factor12:0.0816;

 

 

6 mm x 16 mm x 28 mm SKF KR 16 Cam Follower and Track Roller - Stud Type Video

 

SKF KR 16 Cam Follower, Standard Stud, Crowned, Slotted

SKF KR 16 Cam Follower, Standard Stud, Crowned, Slotted End, Needle Roller, Metric, 16mm Roller Diameter, 6mm Stud Diameter, M6X1 Thread: Cam 

KR16 SKF Cam Follower 16x11 M6 thread

KR16 SKF Cam Follower 16x11 M6 thread. KR design cam followers are fitted with a needle roller and cage assembly. They are also available with a full 

SKF - KR 16 - Motion Industries

SKF KR 16. Crowned Cam Follower - KR Series, 16 mm Roller Dia, 11 mm Roller Width, 6 mm Stud Dia, 16 mm Stud Length, Open, Steel Material 

SKF KR 16 PPA - Crowned Cam Follower - 16 mm Roller Dia

SKF KR 16 PPA - Crowned Cam Follower - 16 mm Roller Dia, 11 mm Roller Width, 6 mm Stud Dia, 16 mm Stud Length - - Amazon.com

SKF - KR 16 PPA - Motion Industries

Buy SKF Crowned & Flat Cam Followers KR 16 PPA direct from Motion Industries. Your proven service leader with reliable delivery since 1972

kr 16 ppska - SKF

SKF uses cookies on our web site to align the information shown as closely as possible to the visitors' preferences and to tailor our web site user experience in 

SKF KR 16 INTERCHANGE

Cam Follower and Track Roller - Stud Type Part series KR 16 is a potential replacement for these common bearing part numbers:

  • KR 16

  • KR 16

  • KR 16

  • KR 16

  • KR 16

  • KR 16

  • KR 16

  • KR 16

Contact Us

TIMKEN AXLE CORP.
Address3567 South Layton Road Anderson Indiana 98528, U.S.A.
Phone(Working Time)+1-775-298-7800
Fax
  • TIMKEN AXLE CORP.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

SKF KR 16 Technical Articles

fag xlife number and size chart pdf
FAG Cylindrical Roller Bearings X-Life at Rs 4500 /piece(sAssociated Bearing Corporation - offering FAG Cylindrical Roller Bearings X-Life, बेलनाकार रोलर बेयरिंग, सिलिंड्रिकल रोलर बेयरिंग at Rs 4500  FAG Special Spherical Roller Bearings for...
skf yar size chart mm
SKF Bearing Inserts E2.YAR 205-2F - RS Hong KongEnergy Efficient Self-Lube Bearing Inserts. YAR 2 Y-bearings form part of SKF's new E2 energy efficient series. Operating with 30% less friction than standard  SKF YAR 207-107-2F Bearing Only...
skf corvette racing hubs dimensions tolerances
1997-2008 Corvette SKF Racing Wheel Bearing HubMid America Motorworks is proud to introduce this C5 & C6 (Up to 2008) Corvette SKF Racing Wheel Bearing Hub Front and Rear Car Set! 97-08 Wheel Hub And Bearing Assembly Front Or Rear SKFThe SKF...

Cam Follower and Track Roller - Stud Type CATEGORIES

  • Angular Contact Ball Bearings
  • Cam Follower and Track Roller - Stud Type
  • Cam Follower and Track Roller - Yoke Type
  • Cartridge Unit Bearings
  • Cylindrical Roller Bearings
  • Flange Block Bearings
  • Hanger Unit Bearings
  • Insert Bearings Cylindrical OD
  • Insert Bearings Spherical OD
  • Mounted Units & Inserts
  • Needle Non Thrust Roller Bearings
  • Pillow Block Bearings
  • Tapered Roller Bearing Assemblies
  • h313 Bearing
  • skf lgmt 3 Bearing
  • 6203 skf Bearing
  • 3205 Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Four-row cylindrical roller bearings
  • Full Complement Cylindrical Roller Radial Bearings
  • Deep Groove Ball Bearings
  • Spherical Roller Bearings
  • Thk Linear Guide
  • Thk Miniature Linear Guide
  • Thk Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • Thk Linear Bearings And Rails
  • Thk Linear Motion
More

Customers Who Viewed SKF KR 16 Bearing Also Viewed

  • IKO CF10-1VBUUR Cam Follower and Track Roller - Stud Type
  • 16 mm x 35 mm x 52 mm SKF NUKR 35 A Cam Follower and Track Roller - Stud Type
  • 30 mm x 80 mm x 100 mm SKF KR 80 PPA Cam Follower and Track Roller - Stud Type
  • 12 mm x 30 mm x 40 mm SKF KR 30 PPXA Cam Follower and Track Roller - Stud Type
  • 18 mm x 40 mm x 58 mm SKF NUKR 40 A Cam Follower and Track Roller - Stud Type

Top Products

LINK BELT SG221ELPA Insert Bearings Spherical OD LINK BELT FBB22423E Flange Block Bearings INA LFR50/8-NPP Cam Follower and Track Roller - Yoke Type
IKO CF10-1V Cam Follower and Track Roller - Stud Type NTN 608z Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TIMKEN AXLE CORP.. Copyright © 2017 - 2023 All Rights Reserved.

  • Home
  • Stock Categories
    • Angular Contact Ball Bearings
    • Cam Follower and Track Roller - Stud Type
    • Cam Follower and Track Roller - Yoke Type
    • Cartridge Unit Bearings
    • Cylindrical Roller Bearings
    • Flange Block Bearings
    • Hanger Unit Bearings
    • Insert Bearings Cylindrical OD
    • Insert Bearings Spherical OD
    • Mounted Units & Inserts
    • Needle Non Thrust Roller Bearings
    • Pillow Block Bearings
    • Tapered Roller Bearing Assemblies
    • h313 Bearing
    • skf lgmt 3 Bearing
    • 6203 skf Bearing
    • 3205 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Four-row cylindrical roller bearings
    • Full Complement Cylindrical Roller Radial Bearings
    • Deep Groove Ball Bearings
    • Spherical Roller Bearings
    • Thk Linear Guide
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
  • Technical Articles
  • Angular Contact Ball Bearings
  • Cam Follower and Track Roller - Stud Type
  • Cam Follower and Track Roller - Yoke Type
✖

Home

Stock Categories

Technical Articles

Angular Contact Ball Bearings

Cam Follower and Track Roller - Stud Type

Cam Follower and Track Roller - Yoke Type

Contact Us