AMI UCECH211-35 Hanger Unit Bearings

T max.:100 °C; G:R1/8"; Recommended tightening torque for set screw:22 Nm; A1:13 mm; T min.:-20 °C; S:19 mm; Z:63.3 mm; Dz:100 mm; Designation of open end cover:SCO210-50; N:18mm;

manufacturer upc number:029176070389; D:120 mm; closure type:Open; B:29 mm; number of rows:1; d:55 mm; cage material:Fiberglass Reinforce; bore type:Straight;

e:16 mm; C0:7.88 kN; T max.:200 °C; d:25.4 mm; L:68 mm; G:M6x1; Designation of bearing:EX205-16G2T20; B:34.8 mm; S:17.4 mm; N:16mm;

D:7.3750 in; manufacturer catalog number:29502-5481; maximum shaft surface speed:4500 fpm; pressure tolerance:Ambient; Weight:0.501 lb; misalignment tolerance:0.020 in; continuous temperature range:-22 to 400°F; lip material:Labyrinth; shaft diameter:6.0000 in; width:0.7500 in;

B:1.0000 in; standards met:MIL-PRF-3150, AISI 5; maximum rpm:1090 RPM; operating temperature range:-65 to +250 &de; D:12.0000 in; radial static load capacity:11870 lbf; axial static load capacity:35600 lbf; bearing material:Steel; radial dynamic load capacity:8720 lbf; inside diameter:10.0000 i

d:.7500 in; bearing material:Duralon Filament; operating temperature range:Maximum of +500; B:1.0000 in; D:1.2500 in;

Fatigue limit load, Cu:0.15 kN; D2:43.45 mm; db min:32.5 mm; r1a max:0.3 mm; rs min:0.3 mm; Static load, C0:2.65 kN; Preload level:8; Nlim (oil):51,000 rpm; d2:33.9 mm; Precision class:P4S;

thread direction:Left Hand; series:AB; d:0.7500 in; misalignment angle:14 °; rod end type:Male Threaded; shank thread length:1-3/4 in; race material:Steel; harmonization code:8483.30.8055; manufacturer catalog:www.aurorabearing.co; lubrication type:Maintenance Free

series:AB; harmonization code:8483.30.8055; head diameter:30 mm; thread direction:Left Hand; shank thread size:M12 x 1.75; overall height:69 mm; shank thread length:33 mm; ball width:16 mm; radial static load capacity:44490 N; Weight:0.078 kg;

head width:0.5620 in; race material:Thermo-Plastic; radial static load capacity:4625 lbf; head diameter:1.5000 in; lubrication type:Non-Lubricatable; thread type:UNF-3A; shank thread size:5/8-18; shank thread length:1.6250 in; rod end type:Male Threaded with M; Weight:0.41 lbs;

B:4-7/8 in; bearing material:Babbitt; overall length:8-1/2 in; overall height:4-1/4 in; base width:3 in; finish/coating:Uncoated; D:6 to 6-1/2 in; d:2-7/16 in; duty type:Standard Duty; manufacturer catalog number:006136;

A2:35 mm; s1:11 mm; C:9.55 kN; H:112.5 mm; A4:28.5 mm; Weight:0.48 kg; C0:4.78 kN; A1:10 mm; Recommended tightening torque for set screw:3.5 Nm; H3:55;

radial dynamic load capacity:4370 lbs; d:1.1875 in; seal type:R-Seal; series:SER; inner ring width:1.5000 in; outer ring width:0.8740 in; bore type:Round; B:1.5000 in; duty type:Normal Duty; D:2.4409 in;

assembly type:Cone & Cup; series:495; d:3.0000 in; finish/coating:Uncoated; static load capacity:48600 lbf; flange type:Flanged Cup; bearing material:Chrome Steel; dynamic load capacity:34700 lbf, 60500 lbf; cone width:1.1720 in; compatible cone:495A;

thread direction:Right Hand; shank thread length:27; d:14 mm; head width:12.25 mm; lubrication type:With Lubrication Fit; ball width:19 mm; series:MC; shank thread size:M14 x 2.0; head diameter:34.75 mm; rod end type:Female Threaded;